-
Notifications
You must be signed in to change notification settings - Fork 0
All issues
Issue creation is restricted in this repository
Issues
is:issue state:open
is:issue state:open
Search results
- Status: Open.#49 In PyDevices/usbif;
- Status: Open.#40 In PyDevices/usbif;
- Status: Open.#29 In PyDevices/usbif;
- Status: Open.#26 In PyDevices/usbif;
network.USBD_NCM arrived upstream in 1.29: deliver it as a costume, or record the exclusion
pin-moveBelongs to the post-1.29 retool project, not the housekeeping sweepBelongs to the post-1.29 retool project, not the housekeeping sweepStatus: Open.#21 In PyDevices/usbif;Can a board be USB host and USB device at the same time? Nothing records an answer
pin-moveBelongs to the post-1.29 retool project, not the housekeeping sweepBelongs to the post-1.29 retool project, not the housekeeping sweepStatus: Open.#16 In PyDevices/usbif;P4 host: can a full-speed device enumerate behind a hub? Try the DWC FS/LS-only root port
pin-moveBelongs to the post-1.29 retool project, not the housekeeping sweepBelongs to the post-1.29 retool project, not the housekeeping sweepStatus: Open.#15 In PyDevices/usbif;usbif is not optional, and CDC+MSC as the default costume changes what a board can be debugged with
pin-moveBelongs to the post-1.29 retool project, not the housekeeping sweepBelongs to the post-1.29 retool project, not the housekeeping sweepStatus: Open.#14 In PyDevices/usbif;examples: run #9's test plan on hardware
pin-moveBelongs to the post-1.29 retool project, not the housekeeping sweepBelongs to the post-1.29 retool project, not the housekeeping sweepStatus: Open.#11 In PyDevices/usbif;Device UAC is speaker-only: no microphone / capture endpoint
pin-moveBelongs to the post-1.29 retool project, not the housekeeping sweepBelongs to the post-1.29 retool project, not the housekeeping sweepStatus: Open.#7 In PyDevices/usbif;P4: machine.SDCard() untested on the Waveshare P4 panel — the slot has been empty; GPIO45 is SD D4, not power control
needs-boardNeeds a board on the bench (P4 panel, S3-Touch-4.3, T-Embed)Needs a board on the bench (P4 panel, S3-Touch-4.3, T-Embed)Status: Open.#4 In PyDevices/usbif;ESP32-P4 high-speed host detects no device; device mode on the same port works
pin-moveBelongs to the post-1.29 retool project, not the housekeeping sweepBelongs to the post-1.29 retool project, not the housekeeping sweepStatus: Open.#3 In PyDevices/usbif;